How to create plane in solidworks

Last Updated: May 9, 2021 | Author: dustin-hu

How do you create a new plane in Solidworks 2020?

How do you make a plane in Solidworks 2018?

How do you build a new plane?

This task shows the various methods for creating planes: offset from plane. parallel through point. angle/normal to a plane.

Normal to curve

  1. Click Plane .
  2. Select the Normal to curve plane type.
  3. Select a reference Curve.
  4. You can select a Point .
  5. Click OK to create the plane.

How do you create an angle plane in Solidworks?

Select a surface and a sketch point on the surface. The plane is created tangent to the surface and coincident to the sketch point. Select a plane or planar face and select an edge, axis, or sketch line. Enter the angle.

How do you make a reference plane at an angle in Solidworks?

How do you create an offset plane in Solidworks?

Creating Planes
  1. Click Plane (Reference Geometry toolbar) or Insert > Reference Geometry > Plane .
  2. In the PropertyManager, select an entity for First Reference . The software creates the most likely plane based on the entity you select.
  3. Select a Second Reference and Third Reference as necessary to define the plane.
  4. Click .

How do you move the top plane in Solidworks?

Using the plane’s handles and edges, you can do the following:
  1. Resize the plane by dragging a corner or edge handle.
  2. Move the plane by dragging the edge of the plane.
  3. Copy the plane by selecting a plane in the graphics area. Then hold down the Ctrl key and, using the edge, drag to a new location.

How do you create a new plane in Solidworks?

Adding planes to SOLIDWORKS is achieved using the Plane Wizard. The Plane Wizard can be accessed via Features > Reference Geometry > Plane on the command manager, or via Insert > Reference Geometry > Plane from the drop down menu. Up to three references can be selected in order to define a new plane.

How do you make a parallel plane in Solidworks?

Right-click a face in the graphics area and click Create a Plane Parallel to Screen. The software adds an On Plane or On Surface 3D sketch point where you right-clicked and positions a reference plane parallel to the screen at that point. The sketch point may move if the surface moves.

What is required to create a new 2D sketch in Solidworks?

How to make a 2D drawing in SOLIDWORKS
  1. If the part/assembly is open, select Make Drawing from Part/Assembly in the New flyout menu.
  2. Select Drawing to use a default template.
  3. Click OK.
  4. Select a sheet size and format.
  5. Select a standard view orientation.
  6. Begin a SOLIDWORKS 2D drawing.

How do I move origin in Solidworks?

Click Tools > Sketch Tools > Align > Align Grid/Origin. In the Align Grid/Origin PropertyManager, under Selections: To change only the sketch origin: Select a vertex or point for Sketch Origin Location .

How do I move an origin file to Solidworks?

Can I move the origin on Solidworks?

You can change the origin location and orientation for blocks and sketches that are sketched on the face of a model or on planes. To display this PropertyManager: In a sketch, click Tools > Sketch Tools > Align > Align Grid/Origin.

How do I move my origin model to Solidworks?

To change the origin location or orientation:
  1. Create blocks from several sketch entities.
  2. In the FeatureManager design tree, right-click a Block. and select Edit Block.
  3. Click Tools > Sketch Tools > Align > Align Grid/Origin.
  4. In the Align Grid/Origin PropertyManager, under Selections:
  5. Click .

How do I move the origin assembly in Solidworks?

Click in Origin, then select the point or vertex to which you want to translate the origin. Click . The origin moves to the location that you selected.

How do you move a coordinate system in Solidworks?

How do I align origins in Solidworks?

To change the origin location or orientation:
  1. Create blocks from several sketch entities.
  2. In the FeatureManager design tree, right-click a Block. and select Edit Block.
  3. Click Tools > Sketch Tools > Align > Align Grid/Origin.
  4. In the Align Grid/Origin PropertyManager, under Selections:
  5. Click .

How do you align parts in Solidworks?

How do I align origins in Solidworks assembly?

From the assembly tab, go to reference geometry -> axis, then select the assembly planes to make an axis. There are three possible combinations of planes, giving you three unique axes (1-2, 1-3, 2-3). Then, compare the axes to the global axes, and rename them to the same for clarity later.

How do you place a part in the origin in Solidworks assembly?

Drag and drop the parts onto the Assembly origin. I think this is doing what you want it to do. Select the parts in Windows Explorer. Drag and drop the parts onto the Assembly origin.

How do I Unfix part in Solidworks assembly?

To fix or float an assembly component:
  1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
  2. Select Fix or Float.
  3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

How do I rotate a part in Solidworks assembly?

Using the PropertyManager to Rotate a Component

Click Rotate Component (Assembly toolbar) or Tools > Component > Rotate. The Rotate Component PropertyManager appears, and the pointer changes to . Select one or more components in the graphics area. Select a component and drag in any direction.

How do you center an assembly in Solidworks?

Profile Center Mate
  1. In an assembly document with two rectangular or cylindrical profiles, click Mate .
  2. In the PropertyManager, under Advanced Mates, click Profile Center .
  3. For Entities to Mate, select the edges or faces that you want to center–align.
  4. In the PropertyManager, you can optionally:
  5. Click twice to close the PropertyManager.

Related Articles