How to use a wood stove damper

How do you use a wood burning stove damper?

Where should the damper on my wood stove?

A damper is usually located approximately 12 to 18 inches from the stove, prior to the spot where the pipe exits into a chimney, if present. The damper retains heat that escapes up the chimney or flue. It allows this heat to dissipate into the area being heated by the woodstove.

How do I know if my wood stove damper is open or closed?

Lean in under your chimney just outside of your wood burning stove. You should find a metal device just within the chimney or flue opening. The damper is open if you can see through the damper up to your chimney. If you only see a metal plate, the damper is in a closed position.

Should I use a damper on my wood stove?

Newer models of wood stove don’t typically require a damper. A damper was traditionally used on older, less efficient, models of stove to help reduce the flow of air leaving the firebox. Certified modern stoves meet stringent regulations and typically won’t need a damper to perform well.

Why does my wood stove go out when I close the door?

This can occur due to several factors: The fire was not burning hot enough to produce the draft needed to pull the air into the fireplace. Feed more dry wood kindling before closing down the stove. … The wood is not properly seasoned or too big to create the heat necessary to produce draft.

How far should damper be open?

The damper should always be fully open before lighting a fire and when the fireplace is in use. Close it when it’s not it use. Operating the fireplace with the damper partially closed will not generate more heat. Instead, blocking the passage through the flue will result in smoke entering the home.

When should I close the damper on my wood stove?

Close the damper until nearly shut for overnight or maintenance fires, such as when you go out to the supermarket. The minimal airflow allows for smoldering coals and existing smoke to escape through the flue pipe, but not enough airflow for flames and mass consumption of the wood.

How do I get the most heat out of my wood stove?

To get the most heat from your stove, try burning hardwoods such as ash, hawthorn or yew. The only downside is that as they are denser, they take longer to season than softwoods, often making them more expensive. If it works out better for you, you can buy a large quantity of ‘wet’ logs and season your own firewood.

Is a damper the same as a flue?

A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation. Your damper should have a chain or handle that you can access in order to open and close it.

Can you leave damper open overnight?

Leave the damper open overnight. Yes, you will lose some heat up the flue, but you will save the occupants of the home from poisoning by colorless, odorless carbon monoxide. … Only when they are completely cold to the touch is it safe to shut the fireplace damper.

Do you leave the doors open on a log burner?

Wood burning stoves are not designed to be used with the door open. You can use a wood burning stove with the door open but doing so will lose the control of the air flow into the stove, making it operate less efficiently and sending more heat up the chimney rather than out into the room.

Should damper be open or closed in summer?

Even if you have a chimney cap, it is a good idea to keep the damper closed in the summer. Chimney caps can become damaged creating a pathway for rainwater or pests to get into your chimney. Closing the damper will ensure that they can’t get into your home through the fireplace.

Do you close the flue on a wood stove?

By opening the wood stove damper, it allows air to get into the chimney so the fire can start. If you keep the damper open, the fire will build and the smoke and soot will vent through your chimney. … By closing the damper, it will reduce the oxygen levels in the chimney, and you’ll have a longer fire.

What temp should a wood stove burn at?

Wood Fire Temperature
  1. A standard wood stove will generally burn at between 500 and 800°F.
  2. A small wood stove will reach slightly lower temperatures than this.
  3. A good fireplace insert will reach temperatures of 400 to 700°F.
  4. An open fireplace puts out a lot less heat as most heads up the chimney.

Why does my fireplace not heat the room?

As the cooler air is sucked into the chimney, the heavier heated air rises to the top and is vented through the chimney along with smoke, soot and other contaminants. This continuous down draft flow of cold air is causing your home to be insufficiently heated.

Which way opens the flue left or right?

A lever that’s pushed to the left will close the damper whereas a lever pushed to the right will open it.

Is the flue open or closed?

Visually Check

A visual check is one of the surest ways of checking whether the damper is open or not. Simply stick your head in the fireplace and look up. … If you have a top-mount damper, check for daylight at the top of the flue. If you can’t see daylight at the top, the damper is closed.

Which way do you open a flue?

You should turn the knob clockwise, as far as it can go, or push the rod all the way up to open the damper. If there is a metal chain in or besides your fireplace, it means that your chimney has a top-mounted damper. If the chain is tightly attached to a hook, the damper is closed.

Why does my wood stove have two dampers?

Modern Stoves

Open both front dampers completely before starting a fire. Modern, efficient wood stoves have dampers below the firebox, or combustion chamber, to supply air directly to the fuel source as well as an additional damper on the door to supply air to allow combustion of gasses released by the burning wood.

Do chimney balloons work?

The plastic Chimney Balloons can be blown up manually and are inserted into the throat of the chimney. However, while they were easy to use, these widely-used inflatables don’t actually perform well in preventing air leaks and helping you maximise your home heating and cooling!