How to program comcast remote

How do I program my Xfinity remote to control my TV?

If it has a Setup button:
  1. Turn on your TV.
  2. Press and hold Setup until the light at the top of the remote changes from red to green.
  3. Enter 9-9-1. The light should flash green twice.
  4. Keep pressing CH ^ until the TV turns off.
  5. Once the TV turns off, press Setup to lock in the code.
  6. Press the TV power button on the remote.

How do I reset my Comcast remote control?

To perform a factory reset:
  1. Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.
  2. Press 9-8-1.
  3. The LED will blink blue three times to indicate that the remote was reset.

How do I program my Comcast remote without a code?

How do you pair a remote to a TV?

Press the (Quick Settings) button on the remote control. Select Settings.

The next steps will depend on your TV menu options:
  1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
  2. Select Remote control — Connect via Bluetooth.
  3. Select Voice Remote Control — Activate button.

How do I sync my Comcast remote to my cable box?

Press and hold the xfinity and Info buttons for five seconds. Wait for the Voice Remote light to change from red to green. Follow the instructions by entering the three-digit, on-screen pairing code. Once the on-screen pairing code is correctly entered, your Voice Remote is paired with the TV Box.

Where is the Setup button on Xfinity remote?

On your remote, press and hold the Setup button. If you don’t have a setup button you can press and hold the Xfinity and Info(i) buttons together. The LED at the top of the remote will change from red to green. Type in the code you found in the previous step using your remote’s number pad.

How do I program my Xfinity XR15 remote?

Press and hold the Xfinity and info buttons together for about five seconds until the status LED at the top of the remote turns green. Enter the three-digit pairing code that displays on the screen. Your XR15 remote is now paired to your TV.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

How do I find my Comcast pairing code?

On your computer visit xfin.tv/access in your web browser. Select “Receive a seven-digit code to pair using the Easy Pair App.” In your computer’s web browser, a seven-digit code will appear. Using the numeric keypad on your handheld X1 remote control, enter the code in the field on your TV screen.

How do you find out your TV code?

Find the code

Open the YouTube app on your Smart TV or streaming device. Go to Settings . Scroll to Link with TV code. A blue TV code will show on your TV.

How do you reset a remote?

How do I fix an unresponsive remote?

Remove the batteries from the remote control and press any of the buttons on the keypad to discharge any stored current. If possible, test the batteries to make sure both have sufficient charge or replace the batteries with new ones. Reinsert the batteries properly in the remote control.

How do you check if a TV remote is working?

Look at the viewfinder or screen of your camera/camcorder or mobile phone. If the remote control sends a signal, you should see a light in the viewfinder or screen of your camera/camcorder or mobile phone when you press a button on the remote control.

How do I reset my set top box remote?

Fix Remote Control Issues
  1. Open the battery cover and make sure the batteries are properly seated.
  2. Press a few device buttons like AUX, DVD, STB, TV. If the top of your remote flashes briefly, the batteries are working. If the top of the remote does not flash, your batteries need to be replaced.

Why is my one for all remote not working?

Remove a battery from the remote and press a button to discharge the remote entirely. Reinsert the battery – the LED should blink twice. Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. … The remote is now reset to its factory defaults.

How do you program a one for all TV remote?

Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the LED on the remote will blink twice.

How do I pair my remote to my set top box remote?

How do you sync a remote to a set top box?

You can program the TV remote to enjoy the functionality of controlling your TV and Set Top Box(STB) simultaneously. Press and hold the STB button, then press the corresponding code while still holding the STB button. Release the STB button when done. – If successful, the STB button LED will turn RED and blink twice.

How do you pair remotes?

How do I program my Xfinity xr2 remote to my cable box?

Pair to a TV Box
  1. While the TV is on, press and hold the Setup button on the remote for 3 seconds until the All Power button changes from red to green.
  2. Enter the first 5-digit code listed for the TV manufacturer. Note: The All Power button should blink twice.
  3. Aim the remote at the TV, and press the Power button.

How do I make my remote control my cable box?

How to control the cable/satellite box using the TV remote…
  1. Press the HOME button, then select [Settings] — [Watching TV] — [External inputs] — [Cable/Satellite box setup] — [Cable/Satellite box control setup].
  2. Follow the on-screen instructions.