How much does a 20×20 paver patio cost?

A 20×20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.

How do you make a patio out of pavers?

  1. Prepare the Patio Area. Laying pavers is a DIY project that takes about one weekend to complete.
  2. Clear Out Grass and Soil.
  3. Add Paver Base.
  4. Add and Level the Paver Sand.
  5. Place the Paver Stones.
  6. Cut Pavers.
  7. Add Edging Stones or Paver Edging.
  8. Finish the Patio.

Can you lay pavers directly on dirt?

Typically, it is not recommended to directly lay down pavers over dirt. For pavers to look and perform well in a permanent installation setting, the ground/dirt floor must be excavated, leveled, and hard compacted.

Is it cheaper to lay concrete or pavers?

As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.

How much does a 12×12 paver patio cost?

Average Cost to Install Brick Paver Patio by Size
Dimensions Total Square Feet Cost Range
10×10 100 $800 – $2,500
12×12 144 $1,150 – $3,600
12×16 192 $1,550 – $4,800
16×16 256* $2,050 – $6,400

What lasts longer concrete or pavers?

Poured concrete lasts up to 25 years and longer. Pavers last up to and beyond 50 years, thanks to their stronger material and simpler repair process. The exact time depends on the materials used, climate, and proper installation.

What is the least expensive patio material?

Concrete is the least expensive patio material on the market right now. You can easily pour it into different designs and shapes. Moreover, it costs the least per square foot as compared to other patio materials. With the help of a professional, a concrete patio will last for years without breaking up.

Are pavers worth the money?

Pavers have a higher resale value because of their beauty and versatility. Concrete slabs are generally more common, but over time, pavers will net you more value because concrete is expensive to replace.

What is the cheapest patio paver?

Gravel is one of the most inexpensive patio material options. You’ll pay approximately $6-$10 per square foot. It is also easy to install so you can save on the cost of labor if you want to do it yourself. All you have to do is wheelbarrow it in and spread it around.

What is the easiest DIY patio?

Bricks or pavers in straight or gently curving patterns typically work well for an easy DIY patio. Flagstones, with their irregular shapes, are perfect for an informal patio with natural appeal.

What can I use instead of pavers?

Gravel. Gravel allows better drainage than solid paving stones, and it is one of the least expensive paver alternatives. If you want to keep the gravel from shifting when you walk on it, opt for unsorted, sharp-edged gravel that is labeled “1/4-inch minus.” Pieces of that gravel type fit snugly together.

Which paver brand is best?

Best Pavers of 2020
  • Cambridge. For more robust project requirements, our recommendation would be the Cambridge 6 x 6.
  • Unilock. Unilock is one of our favorite brands for offering a level of exclusivity to paving projects, the Mattoni EnduraColor Paver in particular.
  • Techobloc.

How thick should patio pavers be?

In order to distribute weight effectively and prevent damage, pavers should be at least 2 inches thick, especially if more than one person crosses them at one time. Saving money by using thinner pavers typically leads to breaks in those pavers, and the breaks allow weeds to pop up and populate the paver walkway.

How do I choose a paver patio color?

How to Choose a Color for Your Backyard Pavers
  1. Know your options.
  2. Determine the right tone. When we talk about the “tone” of a color, we’re referring to how dark or light it is.
  3. Think about how the space will be used.
  4. Weigh monotone vs. multi-colored.
  5. Consider your house materials and roof.
  6. Change other colors?

What colors do pavers come in?

It’s easy for homeowners to default to natural tone pavers because they blend well with surroundings. However, even natural tones can have hues of pink, yellow, or gray that might be accented by sunlight or water from irrigation overspray.

What Colour should my patio be?

If your patio will be built out the back of your home, or if you plan to spend a lot of time under it, we recommend using a light colour with a bright high gloss finish. Not only do light colours create a modern, clean feel, they also act as a great way to insulate your patio from the heat.

Do pavers change color?

Changing Colors on Brick Pavers

Brick pavers tend to fade over time when exposed to the elements, but you can refresh the color with a masonry stain. These stains also allow you to change the color of the brick, such as going from a beige to a red, although color choices are typically limited to common brick colors

Can you spray paint pavers?

Manufacturers have taken much of the work out of spray painting stain on concrete paver bricks. As long as you‘re not staining an area half the size of your yard, you‘ll get by just fine by using ready-mixed colors in common spray cans.

How do you fix discolored pavers?

Old Pavers-With the use of a wet look sealer you can bring out the original colors in faded pavers. A solvent based sealer will give the faded pavers a wet look which basically darkens the pavers and pops out color bringing old pavers back to life.

How do I make my patio pavers look wet?

look paver sealer. The two most popular wet look sealers are the Armor AR350 and the Armor AR500. The Armor AR350 will darken the surface of the pavers to make them look wet, and leave behind a visible, low gloss surface film.